2 - Insulation

EXTERNAL EPS70 SILVER
Graphite Enhanced Grey Polystyrene

 

Our most thermally efficient EPS product with a thermal conductivity of 0.031 W/mK. Aged between four to six weeks to ensure the insulation is delivered to site to the exacting tolerances required for external insulation products . Dimensions: 1200 x 600 x T (mm)

Thermal Conductivity: 0.031 W/mK Compressive Strength: CS(10)70 Dimensional stability: DS(N)2

Downloads

EXTERNAL EPS70 WHITE
Standard White Polystyrene

 

A cheaper alternative to Silver but with a higher thermal conductivity of 0.038 W/mK. Aged between four to six weeks to ensure the insulation is delivered to site to the exacting tolerances required for external insulation products . Dimensions: 1200 x 600 x T (mm)

Thermal Conductivity: 0.037 W/mK Compressive Strength: CS(10)70 Dimensional stability: DS(N)2

Downloads

XPS
Below DPC Insulation

 

Most suited insulator for the plinth area due to it's waterproof properties and high hardness. Dimensions: 1250 x 600 x T (mm)

Thermal Conductivity: 0.035 W/mK Compressive Strength: CS(10)300 Dimensional stability: DS(N)2

Downloads

MINERAL WOOL TR10 or TR15
Fire Proof & Breathable

 

Mineral wool insulation is commonly used on buildings where their height requires the use of a fire-proof product or where high vapour permeability is needed. Not as efficient an insulator as EPS. Dimensions: 1000 x 600 x T (mm)

Thermal Conductivity: 0.039 W/mK Compressive Strength: CS(10)40 Water vapour transmission: 1.4

Downloads

MINERAL WOOL LAMELLAS
Mineral Wool Fire Breaks

 

Used as a fire break in EPS systems such as at party walls or compartment junctions within an apartment building. Dimensions: 1200 x 200 x T (mm)

Thermal Conductivity: 0.042 W/mK Compressive Strength: CS(10)40 Water vapour transmission: 1.4

Downloads